5962-88602013A代理TIIC优势订货 产地货源 价格优惠

HMC1126的中英文资料
The HMC1126 is a gallium arsenide (GaAs), pseudomorphic high electron mobility transfer (pHEMT), monolithic microwave integrated circuit (MMIC), distributed power amplifier that operates from 2 GHz to 50 GHz. The HMC1126 provides 11 dB of gain, 28 dBm output IP3, and 17.5 dBm of output power at 1 dB gain compression, while requiring 65 mA from a 5 V supply.
The HMC1126 amplifier inputs/outputs are internally matched to 50 Ω facilitating integration into multichip modules (MCMs). All data is taken with the chip connected via two 0.025 mm (1 mil) wire bonds of minimal length 0.31 mm (12 mils).
Applications
Test instrumentation
Microwave radios and VSATs
Military and space
Telecommunications infrastructure
Fiber optics
在hmc1126镓是一个arsenide（GaAs），赝配高电子迁移率的传输（PHEMT），monolithic（单片微波集成电路）功率放大器的分布，这operates从2千兆赫至50千兆赫。在所提供的hmc1126 11分贝增益，28 dBm输出IP3和17.5 dBm的输出功率（在1dB增益压缩，当requiring 65毫安从5 V电源。
在hmc1126 /放大器的输出端是internally匹配到50Ωfacilitating整合到multichip模块（MCM）。所有的数据是taken与芯片连通，通过双0.025毫米（1毫米）的小长度的钢丝债券所0.31毫米（12密尔）。
应用
测试仪表
微波radios和甚小孔径终端
军事和太空
电信基础设施
纤维光学
HMC1126的特征
输出功率为1 dB压缩（P1dB）：17.5 dB典型
饱和输出功率（PSAT）：典型的21 dBm
增益：典型的11分贝
输出三阶截距（IP3）：典型的28 dBm
电源电压：5毫伏，65毫安
50Ω匹配输入输出
模具尺寸：2.3毫米×1.45毫米×0.05毫米

AD571-000C的中英文资料
AD571是10位逐次逼近组成的A / D转换器DAC,参考电压,时钟,比较器,逐次逼近寄存器和输出缓冲区,所有在一个芯片上制作的。不需要任何外部组件来执行一个完整的准确性在40μs 10位转换。
操作供应+ 5 V + 15 V和-15 V,AD571将接受模拟输入0 V + 10 V单较±5双,外部可选择的。当空白和转换输入驱动的低,这三个国家输出将和一个转换将开始开放。数据准备完成后,直线低和梨的数据输出。把空白和转换输入空格输出高,决心下一版本的设备。AD571执行真正的10位码40μs转换没有失踪。
AD571可用的两个版本0°C + 70°C的温度范围,AD571J和k AD571S担保10位精度,没有失踪从-55°C + 12码
The AD571 is an 10-bit successive approximation A/D converter consisting of a DAC, voltage reference, clock, comparator, successive approximation register and output buffers--all fabricated on a single chip. No external components are required to perform a full accuracy 10-bit conversion in 40 μs.
Operating on supplies of +5 V to +15 V and -15 V, the AD571 will accepts analog inputs of 0 V to +10 V unipolar of ±5 V bipolar, externally selectable. When the BLANK and CONVERT input is driven low, the three state outputs will be open and a conversion will commence. Upon completion of the the DATA READY line goes low and the data pears at the output. Pulling the BLANK and CONVERT input high blanks the outputs and readies the device for the next version. The AD571 executes a true 10-bit conversion with no missing codes in 40 μs maximum.
The AD571 is available in two versions for the 0°C to +70°C temperature range, the AD571J and K. The AD571S guarantees 10-bit accuracy and no missing codes from -55°C to +125°C.
PRODUCT HIGHLIGHTS
The AD571 is a complete 10-bit A/D converter. No external components are required to perform a conversion. Full-scale calibration accuracy of ± 0.3% is achieved without external trims.
The AD571 is a single chip device employing the most advanced IC processing techniques. Thus, the user has at his disposal a truly precision component with the reliability and low cost inherent in monolithic construction.
The AD571 accepts either unipolar (0 V to +10 V) or bipolar (–5 V to +5 V) analog inputs by grounding or opening a single pin.
The device offers true 10-bit accuracy and exhibits no missing codes over its entire operating temperature range.
Operation is guaranteed with –15 V and +5 V or +15 V supplies. The device will also operate with a –12 V supply.
AD571-000C的参数特征
完成A / D转换器和参考时钟
　　快速连续的近似转换:40μs
　　数字多路复用:
　　三态输出
　　18-Pin陶瓷泡
　　温度没有缺失的代码
　　0°C + 70°C:AD571K
　　-55°C + 125°C:AD571S
　　低成本的整体结构

AD10200是一款内置信号调理电路模块的全通道ADC解决方案，提供改进的动态性能和完全匹配的通道间性能。该模块包括两个宽动态范围ADC，各ADC具有一个针对直接中频采样进行优化的变压器耦合前端。AD10200具有片内采样保持(T/H)电路，并采用创新架构，可实现12位、105 MSPS性能。它借助创新的高密度电路设计和激光调整的薄膜电阻网络实现出色的匹配和性能，同时保持的隔离特性，并大幅缩小电路板面积。AD10200的模数转换部分采用+5 V电源供电，输出级采用+3.3V数字电源供电。每个通道均完全独立，可以在独立的编码和模拟输入下工作。它采用68引脚陶瓷鸥翼式封装，尺寸兼容先期产品AD10242（12位、40 MSPS）和AD10265（12位、65 MSPS）。AD10200采用ADI公司的MIL-38534认证制造线(QML)制造，提供达H级的工作温度范围（-55°C至+125°C）。